Street Roadster Assembly

Easy to follow instructions for our 6V Street Roadster ride on car.

 

Turn over the car body, making sure it's resting on a soft surface, so as not to damage the bodywork.

 

Rear axle assembly.

 

Remove the zip ties and black packing discs from the ends of the rear axle and discard.

 

Take the two black tubular spacers from the parts bag, and slide them on to the rear axle, opposite the motor.

 

 

Then take the rear wheels (the larger pair), and slide them on to the rear axle.

 

 

Put a washer on the outside of the wheel;

 

 

And finally a wheel securing clip to secure the wheel in place. Repeat for both sides.

 

 

Fit the rear wheel trims to finish.

 

 

Moving to the front wheels, first slide a washer on to the axle;

 

 

Then the front wheel, a washer on the outside of the wheel, and a securing clip to secure the wheel in place.

 

 

The wheels are now all secured in to place.

 

Turn the car over to the right way up.

 

In the battery compartment, connect the battery to the car;

 

 

Then push in the rear spoiler;

 

 

Push in the seat;

 

 

And push in the wing mirrors.

 

 

To fit the steering wheel, connect the steering wheel to the car wiring connector;

 

 

Then push the connector back through the dashboard, leaving the protective sleeving between the car body and steering wheel;

 

 

Push the steering wheel all the way down, and secure in to place with the bolt.

 

Your car is now ready to play!